WHY NOT TRY OUR BEARING SELECTOR - CLICK HERE

Inch/Metric Bearing *

Metric

Imperial

Tolerance *

Standard
ABEC 1-3 (ABIS)

Desired Bore *

Desired Outer Diameter *

Material *

Type *

Standard (straight)

Flanged

Closure *

flange shield ball bearings

Metric Series


Bore Øs (d)	Outer Ø (D)	Flange Ø (Df)	Radius (rs - min)	Flange Shield Part No	Shield Width (B1)	Shield Flange Width (Bf1)	Load Rating Cr(N)	Load Rating Cor(N)	Max Speed Grease (x1000 rpm)	Max Speed Oil (x1000 rpm)	Cage Type
1.2	4	4.8	0.1	MF41XZZ	2.5		112	33	110	130	W
1.5	4	5	0.05	F681XZZ	2	0.6	112	33	100	120	W
1.5	5	6.5	0.15	F691XZZ	2.6	0.8	169	50	85	100	W
1.5	6	7.5	0.15	F601XZZ	3	0.8	330	99	75	90	W
2	5	6.1	0.08	F682ZZ	2.3	0.6	169	50	85	100	W
2	5	6.2	0.1	MF52ZZ	2.5	0.6	169	50	85	100	W
2	6	7.5	0.15	F692ZZ	3	0.8	330	99	75	90	W/J/TW
2	6	7.2	0.15	MF62ZZ	2.5		330	99	75	90	WJ
2	7	8.2	0.15	MF72ZZS	3	0.6	386	129	63	75	W
2	7	8.5	0.15	F602ZZS	3.5	0.9	386	129	60	71	W
2.5	6	7.1	0.08	F682XZZ	2.6	0.8	209	74	71	80	W
2.5	7	8.5	0.15	F692XZZS	3.5	0.9	386	129	63	75	W
2.5	8	9.5	0.15	F602XZZ	4	0.9	552	177	60	71	W
3	6	7.2	0.1	MF63ZZ	2.5	0.6	209	74	71	80	W
3	7	8.1	0.1	F683ZZ	3	0.8	311	112	63	75	W
3	8	9.2	0.15	MF83ZZ	3		395	141	60	67	J
3	8	9.5	0.15	F693ZZ	4	0.9	558	180	60	67	W/J/TW
3	9	10.2*	0.2	MF93ZZ	4	0.8	571	189	56	67	W
3	9	10.5	0.15	F603ZZ	5	1	571	189	56	67	W
3	10	11.5	0.15	F623ZZ	4	1	631	219	50	60	J/TW
4	7	8.2	0.1	MF74ZZ	2.5	0.6	255	108	60	67	W
4	8	9.2	0.1	MF84ZZ	3	0.6	395	141	56	67	W/J/TW
4	9	10.3	0.1	F684ZZ	4	1	641	227	53	63	W/J/TW
4	10	11.2*	0.15	MF104ZZ	4	0.8	711	272	48	56	J
4	11	12.5	0.15	F694ZZ	4	1	957	350	48	56	J
4	12	13.5	0.2	F604ZZ	4	1	957	350	48	56	J
4	13	15	0.2	F624ZZ	5	1	1301	488	40	48	J
4	16	18	0.3	F634ZZ	5	1	1340	523	36	43	J
5	8	9.2	0.1	MR85ZZ	2.5	0.6	218	90	53	63	W
5	9	10.2	0.15	MF95ZZ	3	0.6	431	169	50	60	W
5	10	11.2*	0.15	MF105ZZ	4	0.8	431	169	50	60	W
5	11	12.6	0.15	MF115ZZ	4	0.8	716	282	45	53	J
5	11	12.5	0.15	F685ZZ	5	1	716	282	45	53	J/TW
5	13	15	0.2	F695ZZ	4	1	1077	432	43	50	J
5	14	16	0.2	F605ZZ	5	1	1329	507	40	50	J/TW
5	16	18	0.3	F625ZZ	5	1	1729	675	36	43	J/TW
5	19	22	0.3	F635ZZ	6	1.5	2336	896	32	40	J/TW
6	10	11.2	0.1	MF106ZZ	3	0.6	496	218	45	53	W
6	12	13.2*	0.15	MF126ZZ	4	0.8	716	295	43	50	W/J/TW
6	13	15	0.15	F686ZZ	5	1.1	1082	442	40	50	J/TW
6	15	17	0.2	F696ZZ	5	1.2	1340	523	40	45	J
6	17	19	0.3	F606ZZ	6	1.2	2263	846	38	45	J
6	19	22	0.3	F626ZZ	6	1.5	2336	896	32	40	J/TW
7	11	12.2	0.1	MF117ZZS	3	0.6	455	202	43	50	W
7	13	14.2*	0.15	MF137ZZ	4	0.8	541	276	40	48	W
7	14	16	0.15	F687ZZ	5	1.1	1173	513	40	50	J
7	17	19	0.3	F697ZZ	5	1.2	1605	719	36	43	J
7	19	22	0.3	F607ZZ	6	1.5	2336	896	36	43	J/TW
7	22	25	0.3	F627ZZ	7	1.5	3287	1379	30	36	J/TW
8	12	13.2*	0.1	MF128ZZ	3.5	0.8	543	274	40	48	W
8	14	15.6	0.15	MF148ZZ	4	0.8	817	386	38	45	J
8	16	18	0.2	F688ZZ	5	1.1	1252	592	36	43	J/TW
8	19	22	0.3	F698ZZ	6	1.5	2237	917	36	43	J
8	22	25	0.3	F608ZZ	7	1.5	3293	1379	34	40	J,TW
9	14	15.5	0.1	F679ZZS	4.5	0.8	919	468	36	42	J
9	17	19	0.2	F689ZZ	5	1.1	1327	668	36	43	J
9	20	23	0.3	F699ZZ	6	1.5	2467	1081	34	40	J
9	24	27	0.3	F609ZZ	7	1.5	3356	1444	32	38	J

Notes

* This dimension is increased by 0.4mm for shielded or seal version
Bearings also available with stainless materials: suffix S or H
Bearing also available with single shield or seal: suffix Z, RS, RU or TS
TTS⁽⁴⁾ uses smaller ball, load rating is lower than standard
Value ⁽⁵⁾ is not based up upon JIS B 1521

WHY NOT TRY OUR BEARING SELECTOR - CLICK HERE

flange shield ball bearings

General Information